User Manual
Table Of Contents
- Important safety information
- Introduction
- Package contents
- Product overview
- Putting the headset into operation
- Using the headset
- Individually adjusting the headset and wearing it
- Switching the headset on and connecting it
- Switching the headset off
- Activating/deactivating the voice prompts
- Retrieving information on the remaining talk time
- Activating/deactivating the room experience (MB Pro 2 only)
- Changing the volume
- Making calls using the headset
- Managing multiple calls
- Restoring factory default settings (Reset)
- If you are out of the Bluetooth transmission range
- Cleaning and maintaining the headset
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
MB Pro1 | MB Pro 2 | 25
Cleaning and maintaining the headset
Updating the software of the Bluetooth USB dongle
1. Plug the Bluetooth USB dongle into the USB port of your PC.
2. Start the “Sennheiser Updater”.
The “Sennheiser Updater” compares the installed firmware version of the
Bluetooth USB dongle to the latest firmware version available for download.
Upgrade to the latest version according to the instructions of the “Sennheiser
Updater”.
1 2