User Manual
Table Of Contents
- Important safety information
- Introduction
- Package contents
- Product overview
- Putting the headset into operation
- Using the headset
- Individually adjusting the headset and wearing it
- Switching the headset on and connecting it
- Switching the headset off
- Activating/deactivating the voice prompts
- Retrieving information on the remaining talk time
- Activating/deactivating the room experience (MB Pro 2 only)
- Changing the volume
- Making calls using the headset
- Managing multiple calls
- Restoring factory default settings (Reset)
- If you are out of the Bluetooth transmission range
- Cleaning and maintaining the headset
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
MB Pro1 | MB Pro 2 | 7
Product overview
Overview of the LED indications
Meaning during operation
LED Meaning
Headset switches on
Headset switches off
Headset/USB dongle is in pairing mode
Pairing was successful
Pairing has failed or has been cancelled
2s 2s
Connectable state, not connected
Once the headset is successfully connected, the LED goes off.
Meaning during calls
LED on the headset Meaning
Incoming call
Incoming call + rechargeable battery is weak
Meaning during charging
LED corresponds to a talk time of ...
1x
less than 1 hour
1x
between 1 and 2 hours
2x
between 2 and 4 hours
3x
between 4 and 10 hours
4x
above 10 hours
up to 15 hours; battery is fully charged
After 30 seconds, the LED goes off. Press the multi-function button to check the
battery charge level. When the battery is fully charged, the LED lights up blue
constantly.