Owner's Manual

Using the earphones
22 | MOMENTUM True Wireless 2
Switching the earphones on
▷ Take both earbuds out of the charging case and insert them into
your ears (>
21).
If a paired Bluetooth device is within the transmission range, you
hear the voice prompts “Power On” and “Connected”. The LEDs
of the earbuds light up blue.
The Smart Pause function automatically stops music playback
if you remove an earbud from your ear (>
26).
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects.
▷ Before putting your headphones on, adjust the volume
to a low level (>
23).
▷ Do not continuously expose yourself to high volume
levels.
If you take the earbuds out of the charging case during an
incoming call, the call is automatically accepted and you can
use the earbuds directly for making calls.
This Auto Call function can also be deactivated (> 28).
The earbuds automatically switch to idle mode if they do not
find a paired Bluetooth device within 15 minutes or if they are
inactive for approx. 60 minutes (connected via Bluetooth but no
audio playback). You can wake up the earbuds from idle mode
by touching their touch control panels 1x or by briefly inserting
them into the charging case.
“Power On“
“Connected“