Instruction manual MOMENTUM 4 Wireless
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device
- Switching the connection to paired Bluetooth devices/“Connections”
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Information on the Transparency Mode – Listening to ambient sounds or conversations
- Switching between the active noise cancellation ANC and the Transparency Mode
- Adjusting the playback pause in Transparency Mode
- Increasing/decreasing the active noise cancellation ANC and the Transparency Mode
- Adjusting the active noise cancellation ANC
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the Sidetone function
- Using the voice assistant/voice dialing
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/sound signals
- Deactivating the touch pad function
- Deactivating Bluetooth/activating flight mode
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Using the in-flight adapter
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the headphones
14 | MOMENTUM 4
Using the headphones
Information on the rechargeable battery
and the charging process
The headphones have a built-in rechargeable battery. A complete
charging cycle takes approx. 2 hours. The charging time may vary
depending on the power source used and the ambient temperature.
Before using the headphones for the first time, charge the recharge
-
able battery for a complete charging cycle without interruption.
When the headphones are being charged, the LED display lights up
(>
9). Once the headphones are fully charged, the LEDs flash white
for approx. 5 minutes and then go off. When the battery charge drops
to a low level, the voice message “Recharge headset” prompts you to
recharge the headphones. If the headphones are not charged, the
voice prompt will be repeated every 10 minutes until the headphones
switch off.
Sonova Consumer Hearing recommends using the supplied USB
cable and a compatible standard USB power supply for charging the
headphones.
While the headphones are being charged, you can still listen to
music or make phone calls. In this case, however, the charging time
may be longer.
At the end of its operational lifetime, this product with its built-in
rechargeable battery must be disposed of separately from normal
household waste. You can find more information here: >
43.
Charging the headphones' rechargeable
battery
1. Connect the USB-C connector of the charging cable to the USB
socket of the headphones.
R
USB-C
USB-A
1.
2.