Instruction manual MOMENTUM 4 Wireless
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device
- Switching the connection to paired Bluetooth devices/“Connections”
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Information on the Transparency Mode – Listening to ambient sounds or conversations
- Switching between the active noise cancellation ANC and the Transparency Mode
- Adjusting the playback pause in Transparency Mode
- Increasing/decreasing the active noise cancellation ANC and the Transparency Mode
- Adjusting the active noise cancellation ANC
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the Sidetone function
- Using the voice assistant/voice dialing
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/sound signals
- Deactivating the touch pad function
- Deactivating Bluetooth/activating flight mode
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Using the in-flight adapter
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the headphones
MOMENTUM 4 | 17
Pairing the headphones with a Bluetooth
device
1. Switch the headphones off and place them close to the Bluetooth
device (max. 20
cm).
2. Press the multi-function button for 5 seconds.
The headphones are switched on and you hear a sound signal.
The LEDs light up white 3x.
The headphones switch to pairing mode. The LEDs light up as a
white continuous sequence and a melody can be heard.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your Bluetooth
device are displayed.
5. From the list of found Bluetooth devices, select “MOMENTUM 4”.
If necessary, enter the default pin code “0000”.
6. If pairing was successful, you hear the voice prompts “Pairing
successful” and “Connected” one after the other. The LED flashes
white 3x.
If you switch on the headphones for the first time (the pairing
list is empty), they automatically switch to pairing mode.
By default, the name of the headphones is “MOMENTUM 4”.
You can individually adjust the name in the Smart Control
app
(> 19).
If no connection is established within 2 minutes, pairing mode
is terminated and the headphones switch to standby mode. If
necessary, repeat the steps described above.
MOMENTUM 4
............
......
ON
5s
3x
3x
1.
3. 4. 5. 6.
2.
20 cm
“Pairing
successful“