Instruction manual MOMENTUM 4 Wireless
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device
- Switching the connection to paired Bluetooth devices/“Connections”
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Information on the Transparency Mode – Listening to ambient sounds or conversations
- Switching between the active noise cancellation ANC and the Transparency Mode
- Adjusting the playback pause in Transparency Mode
- Increasing/decreasing the active noise cancellation ANC and the Transparency Mode
- Adjusting the active noise cancellation ANC
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the Sidetone function
- Using the voice assistant/voice dialing
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/sound signals
- Deactivating the touch pad function
- Deactivating Bluetooth/activating flight mode
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Using the in-flight adapter
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the headphones
18 | MOMENTUM 4
Switching the connection to paired
Bluetooth devices/“Connections”
To selectively switch the audio connection to paired Bluetooth
devices using the “Connections” function, you require the Smart
Control app (>
19).
▷ In the Smart Control app, tap “Connections”.
The list of Bluetooth devices paired with the headphones
appears.
▷ From the list, select the paired device to which you want to con-
nect the headphones. Make sure that the desired device is
switched on and Bluetooth is activated.
The Bluetooth audio connection between the desired Bluetooth
device and the headphones is established.
The app connection between the device with the Smart Control
app installed and the headphones remains active (only Bluetooth
Low Energy for communication between app and headphones,
the device name is highlighted in bold).
Disconnecting the headphones from a
Bluetooth device
▷ Via the menu of your Bluetooth device, disconnect the connection
to the headphones.
The headphones are disconnected from the Bluetooth device.
You hear the voice prompt “No connection”. The headphones
switch to standby mode.
The “Connections” function also allows you to selectively
delete pairing information of devices without resetting the
headphones to the factory default settings.
To delete the Bluetooth pairing list of the headphones: > 41.