Instruction manual MOMENTUM 4 Wireless
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device
- Switching the connection to paired Bluetooth devices/“Connections”
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Information on the Transparency Mode – Listening to ambient sounds or conversations
- Switching between the active noise cancellation ANC and the Transparency Mode
- Adjusting the playback pause in Transparency Mode
- Increasing/decreasing the active noise cancellation ANC and the Transparency Mode
- Adjusting the active noise cancellation ANC
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the Sidetone function
- Using the voice assistant/voice dialing
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/sound signals
- Deactivating the touch pad function
- Deactivating Bluetooth/activating flight mode
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Using the in-flight adapter
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the headphones
34 | MOMENTUM 4
Adjusting sound effects/the equalizer
To be able to use the sound effects/the equalizer, you require the
Smart Control app (>
19).
▷ In the Smart Control app, select the desired sound effects via the
equalizer. You can use predefined presets, define sound modes
(e.g. bass boost) or define your own settings.
The sound effects are stored in the headphones. These sound
settings are active even without using the Smart Control app, i.e.
when you are using a different Bluetooth device.
Setting the voice prompts/sound signals
To be able to set the voice prompts and sound signals, you require
the Smart Control app (>
19).
In the app settings, you can activate voice prompts and sound sig-
nals (default setting) or deactivate them completely.
Deactivating the touch pad function
To avoid unintentional entries via the touch pad of the headphones,
e.g. when you have put the headphones on while lying down, you can
deactivate the touch pad function. To do this, use the Smart Control
app
(> 19).
Deactivating Bluetooth/activating flight
mode
Deactivate the Bluetooth wireless connection when wireless con-
nections are not allowed, such as on an aircraft during take-off and
landing.
The active noise cancellation ANC can be fully used provided that
the rechargeable battery is charged (>
26).
To deactivate the Bluetooth wireless connection and activate flight
mode:
▷ Press the multi-function button 5x.
You hear the voice prompt “No connection”. The Bluetooth wire-
less connection is deactivated.
To activate the Bluetooth wireless connection again:
The Sound Check function of the Smart Control app allows you
to create customized equalizer presets. Sound Check guides
you step by step to the optimal result.
5x
R
ON/OFF