Instruction manual MOMENTUM 4 Wireless
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device
- Switching the connection to paired Bluetooth devices/“Connections”
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Information on the Transparency Mode – Listening to ambient sounds or conversations
- Switching between the active noise cancellation ANC and the Transparency Mode
- Adjusting the playback pause in Transparency Mode
- Increasing/decreasing the active noise cancellation ANC and the Transparency Mode
- Adjusting the active noise cancellation ANC
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the Sidetone function
- Using the voice assistant/voice dialing
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/sound signals
- Deactivating the touch pad function
- Deactivating Bluetooth/activating flight mode
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Using the in-flight adapter
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Using the headphones
MOMENTUM 4 | 37
Connecting the headphones using the
USB cable
When you connect the headphones to a Mac/PC/mobile device
using the supplied USB cable, you can play audio content from your
Mac/PC/mobile device directly through the headphones.
Setting up the headphones as the default audio output and audio
input device for your Mac/PC/mobile device
▷ Make sure that possible Bluetooth connections are disconnected.
▷ Connect the headphones and the Mac/PC or mobile device via
the USB cable.
The headphones are charged via the USB connection.
▷ From the Systems Preferences or Control Panel of your Mac/PC/
mobile device, select “MOMENTUM 4” as the default audio output
device and/or default audio input device.
▷ Start music playback from the Mac/PC/mobile device.
The music is played through the headphones and the microphone
is used for recording.
Storing and transporting the headphones
Store the headphones in the carry case to prevent damage to the
headphones when you are not using or transporting them.
▷ Fold up the headphones and place them in the carry case as
shown in the illustration.
The headphones automatically switch off.
The headphones are automatically charged when you connect
them to a Mac/PC/mobile device using the USB cable.
If you store or transport the headphones when they are still
switched on, the sensor will not detect that the headphones
have already been taken off in certain situations, e.g. if you
hang them over the edge of a bag or transport them inside a
bag.
Information on how to avoid problems with the sensor can be
found here: >
33