Instruction manual

31
To enter pairing mode:
왘 Press the Play/Pause button
 for 5
seconds.
The LED
 flashes alternatingly in red and
blue, indicating that the headset is in pairing
mode.
왘 Once the headset is detected by the mobile
phone, select “MM 200” and connect.
When the Bluetooth connection is
successfully established, the headset is
identified as “MM 200” on the mobile phone
display.

1s
2s
0
If the headset is already switched on and is in
standby or idle mode, you can enter pairing
mode by pressing the Next or Prev. button for
5 seconds.
MM 200
OK
Keyword
0000
MM200_528260.book Seite 31 Freitag, 9. Mai 2008 1:43 13