Instruction manual Digital 9000 System
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Cleaning and maintaining the Digital 9000 system
106 | Digital 9000
Cleaning and maintaining the Digital 9000
system
왘 Disconnect the products from the mains. Remove the rechargeable bat-
teries or batteries before cleaning.
왘 Only use a soft, dry cloth to clean the products.
Cleaning the sound inlet basket of the microphone head
왘 Unscrew the upper sound inlet basket from the microphone head by
turning it counterclockwise (see diagram).
왘 Remove the foam insert.
There are two ways to clean the sound inlet basket:
• Use a slightly damp cloth to clean the upper sound inlet basket from
the inside and outside.
• Scrub with a brush and rinse with clear water.
왘 If necessary, clean the foam insert with a mild detergent or replace the
foam insert.
왘 Dry the upper sound inlet basket and the foam insert.
왘 Reinsert the foam insert.
왘 Replace the sound inlet basket on the microphone head and screw it
tight.
You should also clean the contacts of the microphone head from time to
time:
왘 Wipe the contacts of the microphone head with a soft and dry cloth.
Cleaning the contacts of the SK 9000 bodypack transmitter
왘 Wipe the contacts with a dry cloth.
CAUTION
Liquids can damage the electronics of the products!
Liquids entering the housing of the products can cause a short-circuit and
damage the electronics.
왘 Keep all liquids away from the products.
왘 Do not use any solvents or cleansing agents.