Instruction manual Digital 9000 System
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Digital 9000 | 21
Product overview
Antennas and antenna boosters
RF out
Filter
on
Com
1
4
1
3
4
5
4
94
2
A 9000
AB 9000
AD 9000
2
3
5
2
6
5
7
8
1 Antenna surface
2 and 9: “Com” and “On” LED
-red
: error
- green: manual mode
- blue: automatic mode (EM 9046-controlled)
- white: firmware update in progress
3 Hole for connection of safety wires
4 RF out socket (N-type)
5 Type plate (not visible here)
6 RF in socket (N-type)
(AB 9000 only)
7 Stand adapter
8 “Filter” rotary switch (see below)
If you are using the antennas/antenna booster with the EM 9046, the “Filter” rotary switch has no func-
tion because the frequency range is automatically set. If you are not using the antennas/anten
na booster
with the EM 9046, the “Filter” rotary switch allows you to set the desired frequency range (“A1” ... “A8”
or “B1” ...
“B8”).