Instruction manual Digital 9000 System
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Preparing the Digital 9000 system for use
44 | Digital 9000
To attach the accupack/battery pack:
왘 Slide the accupack/battery pack onto the guide rails of the bodypack
transmitter until it locks into place with an audible click.
The bodypack transmitter is then ready for operation.
Connecting microphones and audio sources
The audio input is designed for the connection of both pre-polarized con-
denser microphones and other audio sources. DC powering of the con-
denser microphones is via the 3-pin special audio socket 1.
왘 Use one of the recommended Sennheiser microphones or the Sennhe-
iser
CI 1-4 line/instrument cable.
왘 Connect the 3-pin special audio connector of the Sennheiser microphone
or the Sennheiser CI 1-4 line/instrument cable to the 3-pin special audio
socket 1.
왘 Lock the connector by screwing down the coupling ring.
When removing the accupack/battery pack, the settings of the
radio microphone are retained.
For an overview of suitable microphones, refer to the product over-
view on page 25.
21
1
1 2