Instruction manual Digital 9000 System

Using the EM 9046
60 | Digital 9000
“Range detail scan” – performing an optional frequency scan of
the active frequency range and assigning frequency presets to the
channels
왘 Call up the “Range detail scan” menu item.
The activated booster frequency scan and the result of the last fre-
quency scan (“Frequency scan” or Range detail scan”) are displayed.
“Select channel or press SET to scan” appears in the menu selection.
You can now perform a new frequency scan of the activated booster fre-
quency range (optional) or immediately assign frequency presets to the
channels.
Performing a frequency scan To perform a new frequency scan of the activated booster frequency range
(optional):
왘 Start the frequency scan by pressing the jog dial G.
Please note: All audio outputs will be muted!
Assigning frequency presets to
the channels
To assign frequency presets to the channels:
왘 Select one of the channels 1–8 by pressing its channel button M.
A mark with a flag and a channel number appears.
please select booster range
774.000 778.000 782.000 786.000 790.000 794.000 798.000
MHz
Select channel or press SET to scan.
detail scan
n.
.
.
detail sca
n
Numeric
measured
values
Selected
frequency
preset
please select booster range
774.000
Name: „CH1“
778.000 782.000 786.000 790.000 794.000 798.000
MHz
Preset Freq MHz.
freq scan
ch_1
RF A: -104.5 dBm RF B: -106.5 dBm
Range: 774 - 798 MHz
B8.19
785 000
“HD” “HD/LR” “LR/HD” “LR”