ADN Media Control Protocol
Table Of Contents
- Content
- Glossary
- Protocol Basics
- Overview of Commands
- Detailed List of Commands
- Table of Parameters
- AllMicsOff (Set)
- AmRfChannel (Get, Update, Set)
- AmRfOutputPower (Get, Update, Set)
- AutoFreqSelection (Get, Update, Set)
- BlinkOnReq (Get, Update, Set)
- ClearDoesCleanRequestList (Get, Update, Set)
- ConferenceMode (Get, Update, Set)
- EnableSUwShutdown (Get, Update, Set)
- FloorEqualizerHigh (Get, Update, Set)
- FloorEqualizerMid (Get, Update, Set)
- FloorEqualizerLow (Get, Update, Set)
- FloorMix (Get, Update, Set)
- FloorVolume (Get, Update, Set)
- HdRecordIsActive (Get, Update, Set)
- HdRecordError (Get, Update)
- LapsedTalkTime (Get, Update)
- LapsedTalkTimeSN (Get, Update)
- LimitOfTalkTime (Get, Update, Set)
- MaxOpenMic (Get, Update, Set)
- MaxSpeakReqListLength (Get, Update, Set)
- MicBatteryStatus (Get, Update)
- MicButton (Set)
- MicButtonSN (Set)
- MicExtPowerSupply (Get, Update)
- MicRfStatus (Get, Update)
- MicStatus (Get, Update)
- MicStatusSN (Get, Update)
- OpenAccessMode (Get, Update, Set)
- PremonitionTime (Get, Update, Set)
- ReinitSystem (Set)
- SetCUDateTime (Set)
- SpeakerFeedbackSuppression (Get, Update, Set)
- SwitchableMicVolumeIsActive (Get, Update, Set)
- TalkTimeExpirationHardCutOff (Get, Update, Set)
- TalkTimeLimitIsActive (Get, Update, Set)
- XLRMixMinusIsActive (Get, Update, Set)
- XLRinStatus (Get, Update, Set)
- XLRinSensitivity (Get, Update, Set)
- XLRinEqHigh (Get, Update, Set)
- XLRinEqMid (Get, Update, Set)
- XLRinEqLow (Get, Update, Set)
- XLRoutStatus (Get, Update, Set)
- XLRoutVolume (Get, Update, Set)
- XLRoutEqHigh (Get, Update, Set)
- XLRoutEqMid (Get, Update, Set)
- XLRoutEqLow (Get, Update, Set)
- XLROutFeedbackSuppression (Get, Update, Set)
- Error Codes
ADN MediaCtrl Protocol|7
Detailed List of Commands
Detailed List of Commands
For each command a detailed description is given.
• The name of the command.
• The information whether this command can be used to get an attribute (Get), to receive
update information automatically (Update) or to set an attribute (Set).
• A textual explanation.
• Table of parameters.
Table of Parameters Name: Name of parameter.
Value range: Value range of parameter.
Required for get, Sent as update, Required for set: Depending on whether the Command is for
“Get” and/or “Update” and/or “Set”, for each parameter the columns “Required for get”,
“Sent as update”, “Required for set” give the information whether this parameter is needed
accordingly.
Relative change: In case “Set” is possible for the command, the column “Relative change” indi-
cates whether a relative change is allowed for this parameter.
AllMicsOff (Set)
Switch all microphones to off.
Parameters
Name Value range Required for set Relative change
execute min = 1
max = 1
yes not allowed