BDA ADN-W C1 D1 ADN C1 D1

Operating a chairperson unit
Setting Function of the priority key
„On“ Pressing the priority key 4 deactivates all delegate units. All
requests to speak are deleted.
„Off“ Pressing the priority key 4 deactivates all currently active
delegate units. All requests to speak are retained.
4
Briefly press the priority key 4.
The conference system behaves as set.
If you are using the “Conference Manager” software, you can also
deactivate all delegate units with a mouse (detailed information can
be found in the ADN system manual).
Muting all delegate units temporarily (priority function)
Using the priority function, the chairperson can interrupt a discussion at any
time. The speaking privileges of all chairperson units remain active at any time.
4
2
8
Keep the priority key 4 pressed for as long as you
want to mute the delegate units. All conference
units – except for the chairperson units – are muted
immediately. The microphone LED 8 and the signal
light ring 2 of the previously active conference units
flash red. You can take the floor immediately. The
microphone LED 8 and the signal light ring 2 of your
chairperson unit light up red.
Release the priority key 4.
The muting of the conference units is canceled. The
discussion is continued.