ADN Media Control Protocol
Table Of Contents
- Content
- Glossary
- Protocol Basics
- Overview of Commands
- Detailed List of Commands
- Table of Parameters
- AllMicsOff (Set)
- AmRfChannel (Get, Update, Set)
- AmRfOutputPower (Get, Update, Set)
- AutoFreqSelection (Get, Update, Set)
- BlinkOnReq (Get, Update, Set)
- ClearDoesCleanRequestList (Get, Update, Set)
- ConferenceMode (Get, Update, Set)
- EnableSUwShutdown (Get, Update, Set)
- FloorEqualizerHigh (Get, Update, Set)
- FloorEqualizerMid (Get, Update, Set)
- FloorEqualizerLow (Get, Update, Set)
- FloorMix (Get, Update, Set)
- FloorVolume (Get, Update, Set)
- HdRecordIsActive (Get, Update, Set)
- HdRecordError (Get, Update)
- LapsedTalkTime (Get, Update)
- LapsedTalkTimeSN (Get, Update)
- LimitOfTalkTime (Get, Update, Set)
- MaxOpenMic (Get, Update, Set)
- MaxSpeakReqListLength (Get, Update, Set)
- MicBatteryStatus (Get, Update)
- MicButton (Set)
- MicButtonSN (Set)
- MicExtPowerSupply (Get, Update)
- MicRfStatus (Get, Update)
- MicStatus (Get, Update)
- MicStatusSN (Get, Update)
- OpenAccessMode (Get, Update, Set)
- PremonitionTime (Get, Update, Set)
- ReinitSystem (Set)
- SetCUDateTime (Set)
- SpeakerFeedbackSuppression (Get, Update, Set)
- SwitchableMicVolumeIsActive (Get, Update, Set)
- TalkTimeExpirationHardCutOff (Get, Update, Set)
- TalkTimeLimitIsActive (Get, Update, Set)
- XLRMixMinusIsActive (Get, Update, Set)
- XLRinStatus (Get, Update, Set)
- XLRinSensitivity (Get, Update, Set)
- XLRinEqHigh (Get, Update, Set)
- XLRinEqMid (Get, Update, Set)
- XLRinEqLow (Get, Update, Set)
- XLRoutStatus (Get, Update, Set)
- XLRoutVolume (Get, Update, Set)
- XLRoutEqHigh (Get, Update, Set)
- XLRoutEqMid (Get, Update, Set)
- XLRoutEqLow (Get, Update, Set)
- XLROutFeedbackSuppression (Get, Update, Set)
- Error Codes
Error Codes
26|ADN MediaCtrl Protocol
Error Codes
Invalid MediaCtrl commands are responded by an error code: ‘error [error code]: [error text];’
Example: error 1020: value out of range;
Error Code Error Text Error Description
1000 invalid command The given command is not known by the
Sennheiser device.
1010 invalid parameter At least one parameter is invalid for this
command.
1020 value out of range At least one parameter is out of range for this
command.
1030 relative parameter is not
supported
At least one parameter tried an unsupported
relative change.
1040 invalid number of
parameters
Invalid number of parameters for this
command.
1050 get request not allowed A 'get' request is not allowed for this
command.
1060 set request not allowed A 'set' request is not allowed for this command.
1070 processing of request
currently not possible
Currently, the command cannot be processed.