ADN System Instruction Manual

Using the “Conference Manager” software
192 | ADN Digital Conference System
Canceling or stopping the
initialization of the conference units
To cancel or stop the initialization:
왘 Click the “Stop Initialization” button in the “Microphone Unit(s)” library panel.
왘 The “Stop Initialization” window appears.
If
yo
u want to stop the initialization and not initialize all uninitialized conference
units:
왘 Click “Stop”.
If
yo
u want to cancel the initialization and to reverse the changes made:
왘 Click “Cancel”.
If you
want to continue the initialization process:
왘 Click “Continue”.
Changing the numbering of
the
c
onference units
To change the numbering of the conference units:
왘 Click the “Resort” button.
The “Res
ort” button becomes the “Stop Resort” button.
왘 Click the conference unit icons in the desired order.
The num
bering of the conference unit icons is changed.
To stop the numbering of the conference units:
왘 Click the “Stop Resort” button.
The changes made are ret
ain
ed.
To change the numbering of individual conference units:
왘 Select a conference unit icon.
T
h
e selected icon is marked with a blue rectangle and the “Microphone Unit”
box appears.
왘 Enter the desired number into the “ID” field.
The
number of the conference unit icon is changed and the numbering of the
other conference unit icons is automatically adjusted.
If, during numbering, you realize that you require further conference unit
icons, just place them on the canvas. The numbering process is not inter-
rupted.