Quick Guide ADN-W AM
Table Of Contents
- For your safety
- The ADN-W AM antenna module
- Package contents
- Components required for wireless operation
- Product overview ADN-W AM
- Preparing the antenna module for operation
- Setting up and positioning the antenna module
- Connecting the ADN-W AM antenna module to the ADN CU1 central unit
- Switching the antenna module on/off
- Configuring the wireless components
- Cleaning and maintaining the antenna module
- Specifications ADN-W AM
Setting up and positioning the antenna module
8|ADN-W AM
The transmission range of the antenna module and the wireless con-
ference units is approx. 30 m. The transmission range can vary
depending on location and environmental conditions such as wall
thickness, wall composition etc.
왘 Do not obstruct the antennas of the antenna module and the wire-
less conference units with any object.
왘 Set up the devices so that there is a “free line of sight” between the
wireless conference units and the antenna module.
왘 Place the antenna module as centrally as possible and above the
wireless conference units.
왘 Orient the 3 antennas of the antenna module so that they are par-
allel to each other and are directed at a 90° angle towards the wire-
less conference units.
CAUTION
Danger of intermodulation!
If you set up the antenna module and the wireless conference units too
close to one another, intermodulation can occur.
왘 Observe a minimum distance:
– of 1 m between the antenna module and the wireless conference
units and
– of 0.5 m between the wireless conference units.
In some countries/regions (e.g. Canada), the use of wireless
components operating in the 5.15 to 5.25 GHz frequency band
(channel 5 to 8) is restricted to indoor use.
75
...
max. 50 m
ADN CU1
ADN-W AM
> 1 m
> 0.5 m
> 0.5 m
Transmission range approx. 30 m
> 0.5 m
ADN CU1
ESC
90°