Quick Guide
Table Of Contents
- Contents
- For your safety
- The ADN PS power supply
- Package contents
- Components required for operation
- Product overview ADN PS power supply
- Structuring and controlling the conference system
- Preparing the ADN PS power supply for operation
- Setting up the conference system
- Basic information on the set-up of the conference system
- Setting up a small conference system with only the central unit
- Connecting ADN PS power supplies to the ADN CU1 central unit
- Setting up a large conference system comprising ADN PS power supplies and conference units connected in cable strings
- Setting up a large conference system comprising ADN PS power supplies conference units connected in redundant ring topology
- Switching the ADN PS power supply on/off
- Cleaning and maintaining the conference system
- Specifications ADN PS
ADN PS | 13
Setting up the conference system
Please note that there is a limited number of approx. 15-20 conference
units per cable ring due to the voltage drop on the cable ring (see page 5).
You can use optional cable holders for guiding
the system cables. For
detailed information, refer to the ADN system manual.
IN OUT IN OUT IN OUT
PORT I PORT II
ADN D1/ADN C1
ADN PS
CU/PS
PS
PORT I
12
PORT II
12
DATA
100 - 240V
50/60Hz 385W
PORT I & PORT II: max. 5.25A sum
12 12
6789
<A
PORT I
1 1 2
PORT II
2
... 20
1
1
... 20
ADN CU1
ADN PS
OUT
IN IN
OUT OUT
OUT
IN IN
PORT I
1 1 2
PORT II
2
... 20
1
1
... 20
ADN PS
OUT
IN IN
OUT OUT
OUT
IN IN