ADN Conference Manager - Installation instructions

5|Installation Conference Manager
Adjusting the network settings
To enable communication between the central unit and the Windows PC:
왘 Make sure that the network communication between the central unit and the
Windows PC is not blocked by a proxy server and/or a firewall.
Ports 53248, 53249, 53250, 53251, 53252 are used for communication and
port 21 is used for FTP transfer.
왘 Ask your system administrator if a static IP address with a default gateway is
to be used or if the IP address is to be assigned dynamically.
If you have to use a static IP address with a default gateway, ask for the static IP
address, the subnet mask and the IP address of the default gateway.
왘 Use the information provided by your system administrator to adjust the net-
work settings of your central unit. (Proceed as described under in the Sys-
tem instruction manual (Windows XP, see „Configuring the network settings
on a PC running Windows XP“; Windows Vista, see „Configuring the network
settings on a PC running Windows Vista“; Windows 7, see „Configuring the net-
work settings on a PC running Windows 7“; Windows 8, see „Configuring the
network settings on a PC running Windows 8“).
If you have to make the decision whether to use static or dynamic IP addressing,
proceed as follows:
Configuring the network settings on a PC running Windows XP
왘 Click “Start” and then select “Control Panel”.
The “Control Panel” window appears.
왘 Double click “Network and Internet Connections”.
The “Network and Internet connections” window appears.
B
If the central unit is directly connected to a Windows PC, we recommend
dynamic IP address assignment. Depending on your operating system, con-
figure the network settings of the PC and adjust the central unit as
described under (Windows XP, see „Configuring the network settings on
a PC running Windows XP“; Windows Vista, see „Configuring the network
settings on a PC running Windows Vista“; Windows 7, see „Configuring the
network settings on a PC running Windows 7“; Windows 8, see „Configur-
ing the network settings on a PC running Windows 8“).
The devices automatically detect whether IP address assignment is via
DHCP or Zero Configuration Networking (Zeroconf). This process can take
several minutes.
A
햳