User Manual

10 AVX
Product overviews
BA 10 accupack for the SKM AVX or SKM AVX-S handheld transmitter
Microphone stand clamp for the handheld transmitters
SK AVX bodypack transmitter
1
3
2
1 Charge status LED
lights up green: The accupack is fully charged.
lights up red: The accupack is being charged.
2 Micro USB socket for charging the accupack (see page 21)
3 Catches Press simultaneously to release the accupack from
the handheld transmitter.
1
2
1 Microphone clamp for attachment of the handheld transmitter
2 Thread for screwing the microphone clamp onto a stand
1
2
3
5
7
7
4
6
8
0
9
1 On/Off button Short-press to switch the bodypack transmitter on.
Long-press to switch the bodypack transmitter off (for details, see page 24).
2 Mic/Line 3.5 mm jack socket for connecting the clip-on microphone
3 Status LED
lights up green:
A radio link to the receiver is established. The accupack of the bodypack trans-
mitter is sufficiently charged.
flashes green:
The Pair button has been short-pressed. Paired devices are being identified
(for details, see page 26).
flashes alternately
green and red:
The Pair button has been long-pressed. The bodypack transmitter establishes
a radio link to a receiver whose Pair button has also been long-pressed (for
details, see page 26).
lights up yellow:
The bodypack transmitter has been muted with its MUTE switch. In addition,
Muted is displayed on the display panel (for details, see page 25).
flashes red:
The accupack capacity of the bodypack transmitter is only sufficient for
approx. 15 minutes of operation.
lights up red:
No radio link to a receiver. In addition, No Link is displayed on the display
panel.
4 Antenna Do not cover the antenna during transmission to avoid a reduction in
the transmission range.