User Manual

12 AVX
Product overviews
USB power supply/charger
The NT 5-10U power supply/charger is suitable for recharging the BA 10 accu-
pack (handheld transmitter), the BA 20 accupack (receiver) or the BA 30
accupack (bodypack transmitter).
ME 2 clip-on microphone
MKE 2 clip-on microphone
You can recharge the BA 10, BA 20 and BA 30 accupacks as follows:
• using the Sennheiser NT 5-10U USB power supply/charger
•using any USB power supply/charger
• via the USB port of a computer
• via a USB hub with its own power supply
• via a mobile USB power supply (power bank)
1
3
2
1 NT 5-10U USB power supply/charger (country-specific) for
charging the accupacks
2 USB connector (type A) for connection to the USB power supply/charger
3 Micro USB connector for connection to an accupack
1
2
3
4
5
1 Microphone clip for attaching the clip-on microphone to clothing
2 Microphone capsule with omni-directional pick-up pattern
3 Anti-kink protection to prevent cable damage
4 Connection cable (1.6 m) with lockable 3.5 mm jack plug for connection to
the bodypack transmitter
5 Foam windshield for attenuating wind noise by 10 dB
1
2
3
4
5
6
7
1 Microphone capsule with omni-directional pick-up pattern
2 Anti-kink protection to prevent cable damage
3 Microphone clip for attaching the clip-on microphone to clothing
4 Connection cable (1.6 m) with lockable 3.5 mm jack plug for connection to
the bodypack transmitter
5 Frequency response caps for sound optimization
6 Metal windshield for attenuating wind noise by 20 dB
7 Fur windshield for attenuating wind noise by additional 10 dB;
with retaining loop for secure attachment to the
clip-on microphone