User Manual

AVX 15
Putting the products into operation
왘 Plug the receiver‘s rotatable XLR connector into the hot shoe adapter.
왘 Connect the XLR-3 socket of the supplied CI 400 adapter cable to the
XLR-
3 connector of the receiver.
왘 Connect the 3.5 mm jack plug of the CI 400 adapter cable to the 3.5 mm
audio input of the DSLR camera.
Attaching the receiver using the belt clip
You can use the belt clip to attach the receiver to e.g. a belt or to the camera
bag.
Proceed as follows:
왘 Slide the hot shoe adapter onto the belt clip.
왘 Fasten the hot shoe adapter to the belt clip using the locking screw.
왘 Plug the receiver‘s rotatable XLR-3 connector into the hot shoe adapter as
shown on the left.
왘 Use the belt clip to attach the receiver to a camera bag or a belt.
Putting the bodypack transmitter into operation
Removing/inserting the accupack
You can power the bodypack transmitter with the supplied BA 30 accupack.
The accupack must be charged before first time use. The accupack can remain
in the bodypack transmitter for charging.
To remove the accupack from the bodypack transmitter:
왘 Simultaneously press the two catches and pull the accupack away from the
bodypack transmitter.
왘 Remove the protective foil.
Before using the bodypack transmitter for the first time, remove the
protective foil from its accupack.