User Manual

AVX 21
Putting the products into operation
Attaching the handheld transmitter to the microphone stand clamp
왘 Screw the thread to the stand and tighten the screw.
왘 Place the handheld transmitter into the microphone clamp.
왘 Tilt the handheld transmitter so that it is oriented towards the mouth.
Changing the microphone head
The handheld transmitter comes in different sets, including either the
MMD 835-1 or the MMD 42-1 microphone head. You can unscrew the micro-
phone head and replace it by another one, e.g. one with a different pick-up
pattern.
Recharging the accupack
Charging the accupacks using the NT 5-10U power supply/charger
The BA 20 accupack of the receiver and the BA 30 accupack of the bodypack
transmitter can remain in their respective devices for charging. To charge the
BA 10 accupack of the handheld transmitter:
왘 Remove the accupack from the handheld transmitter (see page 15).
왘 If the accupack‘s micro USB socket has a cover flap:
Open the cover flap of the micro USB socket of the accupack and connect
the micro USB connector of the USB cable to the micro USB socket of the
accupack.
To charge the accupack via the USB port of a computer or a mobile USB power
supply (power bank):
왘 Connect the USB connector of the USB cable to a USB socket of the com-
puter or the mobile USB power supply.
왘 Switch the computer or the mobile USB power supply on.
BA 10/BA 30 BA 20
You can recharge the supplied BA 10, BA 20 and BA 30 accupacks as
follows:
• using the Sennheiser NT 5-10U USB power supply/charger
• using a standard USB power supply/charger
• via the USB port of a computer
• via a USB hub with its own power supply
• via a mobile USB power supply (power bank)