User Manual

AVX 23

Using the products

AVX offers true ease of use:

• The devices of a set are factory pre-paired and ready for immediate use.

• The system features automatic frequency management and automatically

searches for free transmission frequencies.

• AVX also features automatic interference management and inaudibly shifts

to a new frequency if interference occurs.

• The system also sets the correct microphone sensitivity automatically.

• Sound that is too loud or, even worse, too quiet is now a thing of the past.

Switching the devices on or off

Switching the receiver on

To manually switch the receiver on:

왘 Short-press the On/Off/Check button.

The status LED indicates the current status of the receiver (see page 7). The

radio link to the last paired transmitter is established automatically as soon

as the paired transmitter is switched on.

Switching the receiver off

To manually switch the receiver off:

왘 Long-press the On/Off/Check button.

The status LED goes off.

Switching the bodypack transmitter on

왘 Short-press the On/Off button.

The display panel and the status LED indicate the current status of the

bodypack transmitter (see page 10 and page 11). The radio link to the last

paired receiver is automatically established as soon as the paired receiver

is switched on.

After switch-on, the receiver and the transmitter will take approx.

10 seconds to establish the radio link. The more sources of interference

there are and the more AVX devices you switch on, the longer it takes

to establish the radio links.

If the receiver is connected to an XLR-3 audio input with P48 phantom

power, the receiver is automatically switched on together with the

video camera – provided that the phantom power is automatically

switched on together with the camera.

SHORT = ON

If the receiver is connected to an XLR-3 audio input with P48 phantom

power, the receiver is automatically switched off together with the

video camera – provided that the phantom power is automatically

switched off together with the camera. If, after switch-off of the video

camera, the phantom power drops only slowly, the receiver can take up

to one minute to switch off.

LONG = OFF

SHORT = ON