User Manual

AVX 7
Product overviews
Product overviews
The transmitters and the receiver are available in different country variants:
• Country variant -3 for Europe, the Mid East and Australia
• Country variant -4 for North, Central and South America (except Brazil)
•Country variant -5 for Japan
• Country variant -6 for Taiwan
•Country variant -7 for Brazil
The country variant can be found on the packaging and on the type plate 1
as shown on the left.
왘 Only use the country variant permitted for use at the venue.
왘 Do not combine devices of different country variants.
EKP AVX receiver
1
1
2
4
5
6
3
1 AF Out button for displaying and adjusting the audio output level (see page 27)
2 4-step LED display When the On/Off/Check button has been pressed, the LED display lights up
green to indicate the remaining battery life of the receiver‘s BA 20 accupack
(see page 24); when the AF Out button has been pressed, the LED display
lights up red to indicate the audio output level (see page 27).
When the right LED flashes red, the capacity of the receiver‘s BA 20 accupack
is only sufficient for a maximum of 15 minutes of operation.
3 BA 20 accupack For details, see page 8.
4 On/Off/Check button Short-press to switch the receiver on (see page 23) or to display the charge
status of the accupack (see page 24);
Long-press to switch the receiver off (see page 23).