User Guide

AVX 19
Putting the products into operation
Putting the ME 2 into operation
The ME 2 clip-on microphone is supplied with the Lavalier Set and provides
professional recordings with a high degree of speech intelligibility.
Using the windshield In order to avoid annoying wind noise during recording, we recommend using
a suitable windshield.
The ME 2 is supplied with a foam windshield which reduces wind noise by up
to 10 dB.
To use the foam windshield:
왘 Slip the foam windshield onto the metal windshield of the ME 2.
Attaching the ME 2 to clothing The ME 2 clip-on microphone is supplied with a microphone clip.
왘 Snap the microphone into the holder of the microphone clip.
The microphone clip can be attached to clothing either vertically or horizon-
tally. To do so, turn the holder so that the microphone is correctly posi-
tioned.
왘 Use the microphone clip to attach the clip-on microphone to clothing (e.g.
lapel, collar, tie).
왘 Conduct the connection cable so that noise due to friction is avoided and
that the connection cable and the antenna do not cross.
왘 Attach the microphone at a distance of approx. 25 cm to the mouth.
The ME 2 clip-on microphone has an omni-directional pick-up pattern. It is
therefore not necessary to position it precisely.
25 cm
(10")