User Guide

24 AVX
Using the products
Switching the bodypack transmitter off
왘 Long-press the On/Off button.
The display panel and the status LED go off.
Switching the handheld transmitter on
왘 Briefly slide the On/Off button in the direction of the transmitter body.
The display panel and the status LED indicate the current status of the
handheld transmitter (see page 9 and page 11). The radio link to the last
paired receiver is automatically established as soon as the paired receiver
is switched on.
Switching the handheld transmitter off
왘 Slide and hold the On/Off button in the direction of the transmitter body.
The display panel and the status LED go off.
Checking the charge status of the accupacks
Checking the charge status of the BA 20 accupack in the receiver
To display the expected remaining battery life of the BA 20 accupack in the
receiver:
왘 Short-press the On/Off/Check button.
The 4-step LED display lights up green to indicate the expected remaining
battery life.
When the right LED of the 4-step LED display flashes red – regardless of
whether the On/Off/Check button has been pressed –, the capacity of the
BA 20 accupack is only sufficient for less than 15 minutes of operation.
LONG = OFF
SHORT = ON
LONG = OFF
SHORT
> 3 h
> 2 h
> 1 h
> 15 min
< 15 min
!
Check
Check