Instruction manual Digital 9000 System
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Product overview
18 | Digital 9000
Overview of the rear panel
The overview of the rear panel shows an EM 9046 receiver equipped with the fixed PSU, CCC and ASP modules
and the optional DRX, DAO and AAO modules. The configuration shown is an example configuration. The inter-
changeable modules are highlighted in color.
Your Sennheiser service partner can configure the EM 9046 as follows:
• 1 to 8 EM 9046 DRX receiver modules
•1 AAO analog audio out module and 1 DAO digital audio out module or
•2 AAO analog audio out modules or
•2 DAO digital audio out modules
H
D
E
D
E
AB DCEF
G
H
I
I
4
G
H
3
1
2
A
0
C
5
E
F
9
B
D
I
J
8
7 6
K
1 ON/OFF switch
2 IEC mains socket, 3-pin
3 LAN UP socket
4 LAN DOWN socket
5 SERVICE interface
6 LAN UP LED
7 LAN DOWN LED
8 WORD CLOCK OUT socket (BNC),
looped-through output (75 )
9 WORD CLOCK IN socket (BNC), input (75 )
0 Blanking plate for aux opening
A XLR-3 sockets (male) for digital audio outputs
1/2 to 7/8, balanced, AES3
B DIGITAL MUTLICORE socket (sub-D, 25-pin), digital, balanced
C XLR-3 sockets (male) for analog audio outputs
1 to 8, transformer balanced
D ANALOG MULTICORE socket (sub-D, 25-pin), analog,
transformer balanced
E RF IN A socket (N-type), antenna input,
12 V out, max. 200 mA, 50
F RF
IN B socket (N-type), ante
nna input,
12 V out, max. 200 mA, 50
G RF
OUT A socket (N-type
), daisy chain output
H RF OUT B socket (N-type), daisy chain output
I EM 9046 type plate
J DRX receiver modules 1 ... 8
K Ventilation openings
A | PSU – power supply unit
B | CCC – clock core controller
C | Aux opening for optional extensions
D | DAO – digital audio out
E | AAO – analog audio out
F | ASP – antenna splitter
G | Type plate
H | DRX – receiver modules
I | Ventilation openings