Instruction manual Digital 9000 System

Table Of Contents
Digital 9000 | 41
Preparing the Digital 9000 system for use
Inserting batteries into the B 60 battery pack
Insert the batteries (see diagram). Observe correct polarity when insert-
ing the batteries.
Removing and inserting the accupack/battery pack
To remove the accupack/battery pack:
Push the two catches for accupack/battery pack D and pull the accu-
pack/battery pack out of the radio microphone’s body (see diagram 1).
To attach the accupack/battery pack:
Push the accupack/battery pack into the radio microphone’s body until
it locks into place with an audible click (see diagram 2).
Only insert high-quality AA size batteries (e.g. lithium or alkaline
batteries) into the B 60 battery pack. Do not insert individual
rechargeable batteries such as NiMH cells.
When removing the accupack/battery pack, the settings of the
radio microphone are retained.
1 2