Instruction manual Digital 9000 System
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Using the EM 9046
84 | Digital 9000
Via the “Cable” menu item, you can emulate the lengths of instrument
cables in 3 steps: “type1”, “type2” and “type3”. If you select “line”, no
emulation takes place.
“live” operating mode – Using a configured
system
In “live” operating mode, you can select channels for headphone monitor-
ing and synchronize the transmitters and the receiver.
To prepare headphone monitoring:
왘 Connect headphones as described on page 38.
왘 Observe the warnings given there.
To select channels for headphone monitoring:
왘 Select a channel by pressing the channel 1–8 button M or press the
multiple channel selection button + and then select several channels
simultaneously.
In “live” operating mode, you can also activate channels for synchroniza-
tion:
왘 Select a channel by pressing the channel 1–8 button M.
왘 Proceed as described on page 77.
Channel 1–8 button
and
multiple channel
selection button +
+
If you have daisy chained several receivers (see “Daisy chaining
receivers” on page 35), you can monitor any channel of the daisy
chain via any headphone socket in the daisy chain.