Instruction manual Digital 9000 System
Table Of Contents
- Digital_9000_Manual_06_2017_EN
- Important safety instructions
- Digital 9000 – System overview
- Delivery includes
- EM 9046 receiver
- EM 9046 CAB cable set
- Antennas and antenna boosters
- GZL 9000 antenna cables
- SKM 9000/SKM 9000 COM radio microphone
- Microphone heads for the SKM 9000 radio microphone
- SK 9000 bodypack transmitter
- Microphones for the SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- CI 1-4 line/instrument cable for the SK 9000 bodypack transmitter
- B 60/B 61 battery packs
- BA 60/BA 61 accupack
- L 60 charger
- Product overview
- EM 9046 receiver
- Antennas and antenna boosters
- GZL 9000 antenna cable
- SKM 9000/SKM 9000 COM radio microphone
- SK 9000 bodypack transmitter
- KA 9000 COM command adapter for the SK 9000 bodypack transmitter
- BA 60 accupack
- BA 61 accupack
- B 60 battery pack
- B 61 battery pack
- L 60 charger
- Preparing the EM 9046 receiver for use
- Preparing the A/AB/AD 9000 antennas and/or antenna boosters for use
- Preparing the SKM 9000 radio microphone for use
- Preparing the SK 9000 bodypack transmitter for use
- Preparing the L 60 charger for use
- Cascading several chargers
- Setting up or mounting the charger
- Preparing the Digital 9000 system for use
- Using the EM 9046
- Using the SKM 9000
- Using the SK 9000
- Using the L 60
- Cleaning and maintaining the Digital 9000 system
- If a problem occurs ...
- Specifications
Digital 9000 | 95
Using the SK 9000
Switching on the SK 9000 on and checking the set frequency
before the RF signal is activated
왘 Switch on the SK 9000 by keeping the ON/OFF button 2 pressed
until the “Name” standard display appears.
The RF signal is not activated and the transmission mode display “HD”/
“LR” flashes.
If you cal
l up t
he “Tune” or “Preset” menu item within the next 10 seconds,
the RF signal remains deactivated until you exit the menu item. If you do
not call up one of the mentioned menu items, the RF signal is automatically
activated after 10 seconds.
To check the set frequency/the selected frequency preset:
왘 Call up the operating menu and press the UP button /DOWN button
until the “Tune” or “Preset” menu item appears.
The set frequency/the selected frequency preset is displayed.
If the displayed value is the desired one:
왘 Wait for 10 seconds to pass.
The RF signal is automatically activated and the transmission mode dis-
play “HD”/“LR” lights up constantly.
If t
he
displayed value is not the desired one:
왘 Call up the “Tune” or “Preset” menu item.
The RF signal remains deactivated until you exit the menu item.
왘 Set the frequency (“Tune” menu item) or select a frequency preset
(“Preset” menu item) and store your setting.
The RF signal is activated and the bodypack transmitter transmits an RF
signal on the set frequency.
Activating/deactivating the automatic lock mode
(Autolock)
The bodypack transmitter has an automatic lock mode that can be acti-
vated or deactivated via the “LOCK” menu item (see page 95).
To permanently activate the automatic lock mode:
왘 Call up the “LOCK” menu item and select “On”.
왘 Store your setting by pressing the SET bu
tton .
The automatic lock mode is activated and the lock mode icon appears on
the standard display.
When the automatic lock mode is activated, you can still call up the oper-
ating menu, use the UP button /DOWN button to select menu
items (read-only function) and call up the “LOCK” menu item in order to
deactivate the automatic lock mode. If, however, you try to call up any
other menu item, the following display appears on the display panel: