Important safety information. • • Please read this instruction manual carefully and completely before using the device. • Make this instruction manual easily accessible to all users at all times. Always include this instruction manual when passing the device on to third parties. • Always keep the device dry and do not expose it to extreme temperatures.
I Safety instructions for Bluetooth devices • The radio waves of a Bluetooth device can impair the operation of electronic and medical devices. • Do not use the device in medical facilities, trains and aircraft, and close to automatic doors, automatic fire alarms or other automatically controlled devices. • Keep this device at least 20 cm from pacemakers. Radio waves can im~air the operation of pacemakers.
• Intended use Intended use of the device includes: • having read this instruction manual, especially the chapter "Important safety information" on page 1, • using the device within the operating conditions and limitations described in this instruction manual. "Improper use" means using the device other than as described in this instruction manual, or under operating conditions which differ from those described herein.
I BTD 300 USB If your. audio source, PC or mobile phone does not support wireless Bluetooth technology, you can use the BTD 300 USB adapter. The BTD 300 USB allows you to extend the functionality of your devices by adding Bluetooth capability. Wireless Bluetooth technology provides an interface for wireless communication between your audio source, PC or mobile phone and other Bluetooth enabled devices.
Connecting the BTD 300 USB 0 0 [ • R7m I ! I I I I I I ! I I I I ! I I I I I I I I I I I I I I I I ! I I I I I I I I I I I I I I I I I I I I I I I If you are using Apple Mac OS@ X, you have to make the following settings in order that the audio signal is transmitted to your Bluetooth device: ~ Open the System Preferences and click "Sound". ~ Click "Output". ~ Click the name of the Sennheiser device.
I Pairing the BTD 300 USB (I) 6
Pairing the BTD 300 USB (II) • ( J .'. .'. .'. .'. .' . •• ••• ••• ••• ••• •• • • • • If the BTD 300 USB does not detect a Bluetooth device, it lights up red after 5 minutes. ~ Reconnect the BTD 300 USB in order to pair it to a Bluetooth device.
• Specifications Weight 6g Bluetooth Bluetooth® version 2.0 + EDR Range Transmission frequency Protocols Codecs up to 10 m 2.4 GHz A2DP, AVRCP SSC, apt-X® Manufacturer Declarations Sennheiser electronic GmbH & Co. KG .gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner.
Declaration of Conformity • This device complies with the basic requirements and other relevant provisions of the following directives: • R&TTE Directive (1999/5/EU) • EMC Directive (2004/108/EU) • Low Voltage Directive (2006/95/EU) • RoHS Directive (2002/95/EU) • WEEE Directive (2002/96/EU) The declaration is available at www.sennheiser.com.
• In compliance with: USA FCC 10: OMOBTD300U Europe CE: 1856 Bluetooth . QO 10 8014908 oBluetooth II e The Bluetooth@ word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronics GmbH & Co. KG is under license. apt-X@ is a registered trademark of Audio Processing Technology Ltd. Mac OS@ X is a trademark of Apple Inc., registered in the u.s. and other countries.
Statements regarding FCC and Industry Canada • This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
• the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This class B digital apparatus complies with the Canadian ICES-003.
• FCC Declaration of Confonnity (Q2£} ~ (""'b SENNHEISER Model No: BTD 300 USB We, Sennheiser Electronic Corporation Strat. Mar1