user manual
Putting the devices into operation
15
Changing the color-coded protection ring
The color-coded protection ring prevents the multi-function switch from accidental
operation. Protection rings in different colors are available as accessories. The protection
rings allow you to clearly identify each radio microphone.
Remove the color-coded protection ring as shown in the left-hand diagram.
Put on a new protection ring as shown in the right-hand diagram.
SKP 100 G3 plug-on transmitter
Inserting the batteries/accupack
For powering the plug-on transmitter, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
Slide the battery compartment cover in the direction of the embossed arrow and open
the cover.
Insert the two batteries or the accupack as shown below. Please observe correct polarity
when inserting the batteries/accupack.
Close the battery compartment.
The battery compartment cover locks into place with an audible click.
Charging the accupack
Remove the BA 2015 accupack (optional accessory).
Insert the BA 2015 accupack into the L 2015 charger (accupack and charger are optional
accessories):
The L 2015 charger can only charge the BA 2015 accupack. Standard batteries
(primary cells) or individual rechargeable battery cells cannot be charged.
ew 100 P G3 Set _529660_0309_Sp9.book Seite 15 Mittwoch, 8. April 2009 6:57 18