Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
The CHG 2W charging base
193
The CHG 2W charging base
The CHG 2W is a wireless charging base that provides conve-
nient wireless charging. The CHG 2W charging base is com-
patible with the SL Tablestand 133-S DW, the SL Tablestand
153-S DW and the SL Boundary 114-S DW.
Return to first page of the instruction manual
Product overview
►
1 Charging surface for wireless energy transfer
• For the SL Tablestand 133-S DW and SL Tablestand 153-
S DW units
2 Socket for power supply unit
• See „Connecting the CHG 2W charging base to the power
supply system“
3 Status LEDs
• Flashing: device is charging
• Flashing rapidly: temperature too high
• Flickering: unknown device on the charger
• See „Meaning of the status LEDs on the charging surfac-
es“