Instruction manual SpeechLine Digital Wireless

Table Of Contents
The SL PASC 4 passive antenna splitter/combiner
213
holes.
Screw the unit consisting of antenna splitter and mounting
accessories into a 19" rack.
Mounting the jointing plate and fastening the
mounting angles (to install two antenna splitters
side by side)
To fasten the mounting angles:
Remove the two recessed head screws on both outer-fac-
ing sides of the antenna splitters.
Fasten the mounting angles to the outer-facing sides of the
antenna splitters using the previously removed recessed
head screws.
To mount the jointing plate:
Place the two antenna splitters side by side on a flat sur-
face with the undersides facing upward.
Screw the two antenna splitters together using the jointing
plate and the six recessed head screws, as shown in the
figure.
Screw the unit consisting of the two antenna splitters into
a 19" rack.