Quick Start Guide

ManualsBrandsSennheiser ManualsAudioClipMic Digital

Sennheiser electronic GmbH & Co. KG

Am Labor 1, 30900 Wedemark, Germany

www.sennheiser.com

ClipMic digital

Quick Start Guide

Adjusting Input Level with

Apogee Maestro App

Open Apogee Maestro app and choose Sennheiser

ClipMic digital from the main menu.

Tap the Input Monitoring button to hear your micro-

phone input.

Turn the Gain Adjustment knob to increase or decrea-

se the microphone input to the desired level. Small

adjustments can also be made by pressing either the

“–“or “+“ buttons

Tips for Setting Input Level

The best way to do this is to monitor the loudest

sound you will be recording and adjust the input

gain so the input metering remains green, yellow or

orange and not red. If the microphone input meter

becomes red when recording, the input is too high

and the recording will be distorted.

Select an Input Processing preset. The presets use

onboard DSP processing to shape the sound with EQ,

compression and limiting to achieve the most natural

or unique result. Select No Processing or leave as is to

bypass this feature.

Recording

Note:

It is recommended that you set your iOS device to

airplane mode to prevent any incoming calls from

disrupting your recordings.

Open Apogee MetaRecorder or any other Core Audio

compatible recording App.

ClipMic digital should be automatically detected and

selected as the input device.

If you haven’t already done so, connect headphones to

the built-in output on your iOS device and enable input

monitoring in the recording App.

Tap the Record button

in the App to begin.

For more info on Apogee MetaRecorder

and other compatible apps,

visit www.apogeedigital.com/apps

Attachment of the Microphone

25 cm (10 inches)

Apple Watch Remote Control

MetaRecorder offers an Apple Watch App to remotely

operate these controls.

Tap to operate

transport controls.

Force tap to toggle

favorite status.

Tap to add

a marker.

Tap to reset

max. peak display.

Tap “+” or “–“

to adjust input

gain.

Printed in Germany, Publ. 04/15, 560096/A03

QG_ClipMic digital.indd 1 29.05.2015 10:48:26

Summary of content (2 pages)

PAGE 1
3B Adjusting Input Level with 4 Recording Apogee Maestro App Note: It is recommended that you set your iOS device to airplane mode to prevent any incoming calls from disrupting your recordings. XXOpen Apogee Maestro app and choose Sennheiser ClipMic digital from the main menu. Quick Start Guide ClipMic digital XXOpen Apogee MetaRecorder or any other Core Audio compatible recording App. ClipMic digital should be automatically detected and selected as the input device.
PAGE 2
Overview In the Box 1 ClipMic digital microphone 1 Clip 1 Metal wind screen 1 Carrying pouch 1 Quick Start Guide 1 2 3 1 Sennheiser ME 2 microphone capsule 2 Apple MFi certified Lightning connector 3 Apogee PureDigital A/D conversion circuitry 3A Preparing the Recording ClipMic digital’s input gain can be controlled from either of Apogee’s two iOS Apps or from any recording App that supports Core Audio input control.