Instruction manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the earbuds
- Information on the rechargeable battery, the charging process and the first use
- Charging the rechargeable battery of the earbuds and the charging case
- Connecting the earbuds to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the earbuds with a Bluetooth device
- Switching the connection to paired Bluetooth devices/“Connections”
- Disconnecting the earbuds from a Bluetooth device
- Pairing the earbuds with each other (optional)/restoring the factory default settings
- Installing the Smart Control app
- Selecting suitable ear adapters for optimum fit of the earbuds
- Inserting the earbuds into the ears
- Switching the earbuds on
- Switching the earbuds off
- Adjusting the volume
- Using the voice assistant/voice dialing
- Controlling music playback
- Making calls using the earbuds
- Using the Auto Call function
- Using the Sidetone function
- Displaying the battery charge status
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Storing or transporting the earbuds in the charging case
- Care and maintenance of the earbuds/charging case
- FAQ/If a problem occurs ...
- Specifications
- Manufacturer Declarations
Care and maintenance of the earbuds/charging case
30 | CX True Wireless
Care and maintenance of the
earbuds/charging case
▷ Only clean the charging case with a soft, dry cloth.
▷ Clean the earbuds with a slightly damp cloth.
▷ You can clean the silicone ear adapters under lukewarm running
water. Let the ear adapters air dry at room temperature for at
least 12 hours before re-attaching them to the earbuds.
▷ Clean the charging contacts on the earbuds and in the charging
case from time to time using e.g. a cotton swab.
If the earbuds have gotten wet:
▷ Remove the ear adapters and dry the earbuds and ear adapters
with a dry cloth. If necessary, leave the earbuds and ear adapters
dry at room temperature for approx. 12 hours.
Replacing the ear adapters
For reasons of hygiene, you should replace your ear adapters from
time to time. Spare ear adapters are available from your Sennheiser
partner.
1. Pull the ear adapter away from the in-ear sound tunnel.
2. Mount the new ear adapter to the in-ear sound tunnel. Ensure that
it locks into place.
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit
and damage the electronics.
▷ Keep all liquids far away from the product.
▷ Do not use any solvents or cleansing agents.