DECT Comfort call Setup Guide DW Series Setup Guide
Contents “Setup Guide” Contents “Setup Guide” Important safety information ....................................................................... 2 Scope of delivery and overview of the DW series ...................................... 3 Base stations with components ................................................................... 3 Headsets with components .......................................................................... 4 Product overview of the base stations .................................
Important safety information Important safety information 왘 Please read this instruction manual carefully and completely before using the product. 왘 Always include this instruction manual when passing the product on to third parties. 왘 Do not use an obviously defective product. Preventing damage to health and accidents 왘 Do not listen at high volume levels for long periods of time to prevent hearing damage. 왘 Always maintain a distance of at least 3.
Scope of delivery and overview of the DW series Scope of delivery and overview of the DW series The DW series allows you to combine base stations (BS) and headsets (HS) to meet your needs. The listed headsets and base stations are compatible with each other. The DW series base stations marked with ML in their name are optimized for Microsoft Lync™. The scope of delivery includes – depending on the product purchased – a base station and/or a headset with corresponding components.
Scope of delivery and overview of the DW series Headsets with components DW Office – HS monaural, with different wearing styles DW Pro1 – HS monaural, with headband DW Pro2 – HS binaural, with headband DW Office – HS DW Pro1 – HS Quick Guide DW Pro2 – HS 4 | DW Series – Setup Guide
Product overview of the base stations Product overview of the base stations Overview of the front DW BS DW BS ML 쐇 DW BS USB DW BS USB ML 쐃 DW BS Phone 쐋 쐋 쐃 쐏 쐄 쐃 PC button with LED 쐏 Link LED 쐇 Charging contacts 쐄 Charge status LED 쐋 Phone button with LED Overview of the rear DW BS DW BS ML 쐆 쐂 DW BS USB DW BS USB ML 쐊 쐎 쐅 DW BS Phone 씉 씈 쐉 쐈 쐂 ABC switch 쐅 ACC socket 쐆 Microphone volume control 쐈 Set button 쐊 Phone socket 쐉 DIP switch row 1 to 6 쐎 Handset socket 씈 DC IN so
Setting up the base station Setting up the base station You can use the headset system with your fixed line phone and/or your computer. The base station controls the wireless communication to the headsets. 왘 Place the base station at a minimum distance of 15 cm from the fixed line phone. Connecting the base station to the mains power supply 1 Remove the cover. 2 Connect the connector of the power supply unit to the DC IN socket (marked yellow). Connect the power supply unit to a wall socket.
Setting up the base station Connecting the base station to a fixed line phone Connection possibilities Page A Connection to a fixed line phone without headset socket 7 B Connection to a fixed line phone with headset socket 8 C Connection to an optional mechanical handset lifter 8 왘 Check which connection possibility is best suited for your telephone. 왘 Follow the instructions in the corresponding chapter.
Setting up the base station B Connecting the base station to a fixed line phone with headset socket 1 Connect the telephone cable to the headset socket on the telephone and to the Phone socket (marked green) on the base station. 2 Use a pointed object (e.g. a ball pen) to set the DIP switches 1 and 2 to the position shown.
Setting up the base station Connecting the base station to an optional electronic hook switch control (EHS) The necessary EHS connection cables as well as adapter cables for manufacturer specific standards are available as optional accessories from your Sennheiser partner. The corresponding quick guides are supplied with the cables or can be found on the product page on our website at www.sennheiser.com.
Setting up the base station Connecting the base station to a computer 왘 Connect the USB cable to the PC socket (marked orange) on the base station and to a USB socket of your computer. The operating system detects the USB audio device ”Sennheiser DECT” and installs the necessary drivers. Sennheiser PC software The free Sennheiser PC software allows you to add value to your Sennheiser products. The Sennheiser Updater, for example, facilitates easy updating of products with new software.
Charging the headset Charging the headset Charge the rechargeable battery for at least 20 minutes without interruption before using it for the first time. A complete charging process takes about 60 minutes. Charging the headset in the base station 왘 Place the headset into the magnetic holder of the base station. The Headset LED lights up blue and the rechargeable battery is being charged. The Charge status LED on the base station indicates the charge status.
Charging the headset Charging the headset using the optional CH 10 headset charger The Sennheiser CH 10 headset charger is an optional accessory available from your Sennheiser partner. The CH 10 allows you to charge additional DW series headsets. DW Office – HS DW Pro1 – HS DW Pro2 – HS 왘 Refer to the instruction manual of the CH 10 for more information. Charging several headsets simultaneously The MCH 7 multi USB power source is an optional accessory available from your Sennheiser partner.
Testing the headset system and the sound quality Testing the headset system and the sound quality Adjusting the headset system using the DIP switches 1 Press the Link button on the headset to disconnect an existing wireless link between base station and headset. The LEDs on the headset and on the base station go off.
Testing the headset system and the sound quality Adjusting the radio range – DIP switch 3 If many DECT systems are operated in a confined space, interference can occur. In this case, you should change the radio range. Switch position Function Standard radio range Reduced radio range Use this setting in order to avoid interference with other DECT systems Range of approx.
Testing the headset system and the sound quality Adjusting the audio signal by means of the dial tone 1 Put on the headset and press the Phone button on the base station. 2 Press the Link button on the headset. The Link LED lights up blue. 3 Lift the handset. You hear a dial tone. 4 Set the ABC switch to the position A, B or C so that you can hear a clear dial tone in the headset.
Testing the headset system and the sound quality Adjusting the volume Adjusting the microphone volume of the call transmission By default, the microphone volume control is set to position 4. This setting is suitable for most telephones. 왘 Make a call to someone who will help you find the correct sensitivity setting for your microphone. 왘 Turn the microphone volume control so that the other party can hear you at a comfortable level.
If a problem occurs If a problem occurs For causes and solutions that are mainly related to the headset, refer to the chapter “If a problem occurs ...” in the “User Guide”. Problem Possible cause Possible solution The headset is placed into the base station but the Charge status LED if off Base station is not connected to the mains power supply Connect the base station to the mains power supply. 6 Rechargeable battery is deep discharged Wait several minutes until the Charge status LED lights up.
Specifications Specifications Base station DW BS/DW BS ML Dimensions 108 x 116 x 114 mm (W x H x D) Weight approx. 368 g Operating temperature range +5°C to +45°C (+41°F to +113°F) Storage temperature range –20°C to +70°C (–4°F to +158°F) DW BS USB/DW BS USB ML/DW BS Phone Dimensions 108 x 116 x 114 mm (W x H x D) Weight approx.
Specifications Power supply unit Nominal input voltage 100 – 240 V~ Nominal input current max. 0.2 A Mains frequency 50 – 60 Hz Nominal output voltage 5V Nominal output current max. 850 mA Operating temperature range +5°C to +45°C (+41°F to +113°F) Storage temperature range –20°C to +70°C (–4°F to +158°F) Relative humidity operation: 20 to 85% storage: 20 to 95% Weight approx. 75 g DECT EU, UK, AU: CAT IQ 1.0 Frequency 1,880 to 1,900 MHz SAR value of DW Office – HS 0.196 W/kg (max.
Sennheiser Communications A/S Industriparken 27, DK-2750 Ballerup, Denmark www.sennheiser.com Printed in China, Publ.