Setup Guide

Setting up the base station
10 | DW Series – Setup Guide
Connecting the base station to a computer
왘 Connect the USB cable to the PC socket (marked orange) on the base
station and to a USB socket of your computer. The operating system
detects the USB audio device ”Sennheiser DECT” and installs the neces-
sary drivers.
Sennheiser PC software
The free Sennheiser PC software allows you to add value to your
Sennheiser products. The Sennheiser Updater, for example, facilitates easy
u
pdating of products with new software. For more information, visit our
website at www.sennheiser.com/cco/software.
Securing the connected cables
1 Replace the cover to the rear of the base station.
2 Tilt the cover upwards until it locks into place with an audible click.
1 2