Product specification

PRODUCT SPECIFICATION
evolution wired
e 602-II
1/2
FEATURES
• Rugged, lightweight aluminium body for stable positio-
ning on long microphone boom arms
• Lightweight high-performance voice coil construction
• Fast transient response
• Low frequency extension
• Ideal for direct use on the most proble matic bass signal
sources
• Frequency-independent directivity provides isolation
from other on-stage signals
• Hum compensating coil
• Integral stand mount
DELIVERY INCLUDES
• e 602-II
• pouch
• quick guide
• safety guide
The e 602-II is a cardioid instrument microphone especially
suitable for use with bass drums, bass guitar cabs, tubas
and other low frequency instruments.
SPECIFICATIONS
Transducer principle dynamic
Frequency response 20 - 16,000 Hz
Pick-up pattern cardioid
Sensitivity (free field) 0.9 mV/Pa (at 50 Hz)
0.25 mV/Pa (at 1 kHz)
Nominal impedance (at
1 kHz)
350 Ω
Min. terminating impedance 1 kΩ
Connector XLR-3
Dimensions ⌀ 60 x 153 mm
Weight 318 g
ARCHITECT‘S SPECIFICATION
The microphone shall be a dynamic cardioid designed for
use with low frequency ins truments. It shall have a rugged
aluminium body with an integral stand mount and shall be
fitted with a hum compensating coil.
The frequency response shall be 20 Hz – 16,000 Hz and
the sensitivity (free field, no load) shall be 0.25 mV/Pa at
1 kHz and 0.9 mV/Pa at 50 Hz. Nominal impedance shall be
350 Ω, with a min. terminating impedance of 1 kΩ.
The microphone shall provide a 3-pin XLR
connector. Di-
mensions shall be 60 x 153 mm (2.36" x 6.02"). Weight shall
be 318 grams (11.22 oz).
The microphone shall be the Sennheiser e 602-II.