e 906 Instruction manual Sennheiser electronic GmbH & Co.KG Am Labor 1 · 30900 Wedemark · Germany www.sennheiser.com Publ.
Delivery includes Delivery includes • e 906 • microphone clamp MZQ 100 • pouch • quick guide • safety guide Product overview 1 4 FRON T 2 3 1. Sound inlet basket 2. 3-position slide switch for adjusting the presence filter 3. XLR-3 connector 4.
Installation Installation Attaching the microphone f Screw the microphone clamp to a stand. f Place the microphone with its back end into the microphone clamp. f Orient the microphone together with the microphone clamp. Connecting the microphone f Connect the XLR-3 socket of the microphone cable (optional accessories) to the XLR-3 socket of the microphone.
Operation Operation Positioning the microphone an a guitar amp f The front of the microphone must face the guitar amplifier.
Operation Positioning the monitor loudspeakers f To prevent feedback and crosstalk, postion your monitor loudspeakers in the angle area of the highest cancellation of the microphone (approx. 120°). 120° Adapting the sound characteristics The e 906 features a switchable presence filter which allows to adapt the microphone to the different sound requirements and styles (see frequency response). f Use a pointed tool such as a small screwdriver to move the 3-position slide switch to the desired position.
Cleaning and maintaining the e 906 Cleaning and maintaining the e 906 CAUTION LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT! Liquids entering the housing of the product can cause a short-circuit and damage the electronics. f Keep all liquids away from the product. f Do not use any solvents or cleansing agents. f Disconnect the products from the power supply system and remove rechargeable batteries and batteries before you begin cleaning. f Clean all products only with a soft, dry cloth.
Specifications Polar pattern 30° 0° 0 5 0° 30° 10 60° 125 Hz 60° 15 250 Hz 20 500 Hz 25 dB 90° 90° 1,000 Hz 2,000 Hz 4,000 Hz 120° 120° 150° 180° 8,000 Hz 16,000 Hz 150° 180° Frequency response dBV -40 -50 -60 -70 -80 H z 20 ,0 00 10 ,0 00 5, 00 0 2, 00 0 1,0 00 50 0 20 0 10 0 50 -90 (0°, 1 m) Connector assignment 1 3 2 + XLR 1 3 3 XLR + 2 3 + 1 XLR 2 2 3 1 XLR + + UNBALANCED + BALANCED 6.3 mm XLR 1 + 2 + 6.
Overview of applications Overview of applications Primary application Secondary application e 602 II e 604 e 608 e 609 silver e 614 e 835 e 845 e 865 e 901 e 902 e 904 e 906 e 908 e 914 e 935 e 945 e 965 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • e 906 | 8/8
