e 908 Instruction manual e908_Manual_01_2019_EN.indd 1 26.02.
Delivery includes Delivery includes e 908 D e 908 B e 908 B ew • e 908 D microphone • e 908 B microphone • e 908 B ew microphone • MZA 900 P phantom power adapter • MZA 900 P phantom power adapter • MZH 908 D microphone clamp • MZH 908 B microphone clamp • MZH 908 B microphone clamp • Pouch • Pouch • Pouch • Quick guide • Quick guide • Quick guide • Safety guide • Safety guide • Safety guide Product overview 1 1 2 2 3 3 5 4 4 e 908 D e 908 B / e 908 B ew 1.
Installation Installation Attaching the microphone Carefully bend the flexible goose neck. Connecting the microphone Plug the 3.5 mm mini jack plug into the 3.5mm jack socket of the MZA 900 P phantom power adapter (included with e 908 B and e 908 D). Tighten the coupling ring. Plug the XLR cable into the XLR output of the MZA 900 P phantom power adapter. e 908 | 3/8 e908_Manual_01_2019_EN.indd 3 26.02.
Installation Using the windshield Place the MZW 908 (optional accessories) windshield over the microphone head. e 908 | 4/8 e908_Manual_01_2019_EN.indd 4 26.02.
Operation Operation Positioning the microphone e 908 B/e 908 B ew on a wind instrument Use the microphone clamp to attach the e 908 to the bell of the instrument. It is vital to observe the following notes: Position Resulting sound Commentary A Reduced ambient noise Directed into the bell of the instrument. B Clear, powerful sound C Balanced, natural sound A Directed partly towards the bell and partly towards the body of the instrument.
Cleaning and maintaining the e 908 Positioning the monitor loudspeakers To prevent feedback and crosstalk, postion your monitor loudspeakers in the angle area of the highest cancellation of the microphone (approx. 180°). 180° Cleaning and maintaining the e 908 CAUTION LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT! Liquids entering the housing of the product can cause a short-circuit and damage the electronics. Keep all liquids away from the product. Do not use any solvents or cleansing agents.
Specifications Specifications Transducer principle pre-polarised condenser microphone Frequency response 40 - 20,000 Hz Pick-up pattern cardioid Sensitivity (free field, no load) 4.0 mV/Pa Nominal impedance (at 1 kHz) 100 Ω (balanced)* Min. terminating impedance 2 kΩ* Max. sound pressure level (active) e 908 B, e 908 D e 908 B ew 35 dB(A) 30 dB(A) Phantom powering 12 - 48 V* Connector e 908 B, e 908 D e 908 B ew XLR-3* 3.
Overview of applications Connector assignment e 908 B/e 908 D 3.5 mm 3.5 mm + 2 1 3 e 908 B ew 3.5 mm + Overview of applications Primary application Secondary application e 602 II e 604 e 608 e 609 silver e 614 e 835 e 845 e 865 e 901 e 902 e 904 e 906 e 908 e 914 e 935 e 945 e 965 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • e 908 | 8/8 e908_Manual_01_2019_EN.indd 8 26.
