e 608 Instruction manual
Delivery includes Delivery includes • e 608 • microphone clamp • connection cable • pouch • quick guide • safety guide Product overview 1 2 3 4 5 1. Microphone head 2. Elastic suspension 3. Gooseneck 4. Microphone clamp 5. 3.
Installation Installation Attaching the microphone Carefully bend the flexible goose neck. Connecting the microphone Connect the XLR-3 socket of the microphone cable (optional accessories) to the XLR-3 socket of the microphone.
Installation Using accessories The MZH 908 D (left image) and MZH 908 B (right image) clips are available as optional accessories for the e 608. Remove the attached clip from the goose neck. Unscrew the screw on the clip. Press the clip firmly onto the goose neck. Tighten the screw on the clip.
Operation Operation Positioning the microphone on a wind instrument Use the microphone clamp to attach the e 608 to the bell of the instrument. It is vital to observe the following notes: Position Resulting sound Commentary A Reduced ambient noise B Clear, powerful sound Use the supplied clamp to attach the microphone to the bell of the instrument.
Cleaning and maintaining the e 608 Positioning the monitor loudspeakers To prevent feedback and crosstalk, postion your monitor loudspeakers in the angle area of the highest cancellation of the microphone (approx. 120°). 120° Cleaning and maintaining the e 608 CAUTION LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT! Liquids entering the housing of the product can cause a short-circuit and damage the electronics. Keep all liquids away from the product. Do not use any solvents or cleansing agents.
Specifications Specifications Transducer principle dynamic Frequency response 40 - 16,000 Hz Pick-up pattern super-cardioid Sensitivity (free field, no load) 0.8 mV/Pa Nominal impedance (at 1 kHz) 250 Ω Min. terminating impedance 1 kΩ Operating temperature 0°C to +40°C Connection cable 3 m, with 3.
Overview of applications Connector assignment 1 3 2 + + XLR 1 3 3 3 + 1 2 XLR 2 3 1 XLR + + UNBALANCED + BALANCED 6.3 mm XLR 1 + 2 2 + XLR 6.