e 904 Instruction manual
Delivery includes Delivery includes • e 904 • MZH 604 microphone clamp • pouch • quick guide • safety guide Product overview 1 2 3 1. Sound inlet basket 2. XLR-3 connector 3.
Installation Installation Attaching the microphone Fasten the holder to the microphone using the screw. Connecting the microphone Connect the XLR-3 socket of the microphone cable (optional accessories) to the XLR-3 socket of the microphone.
Operation Operation Positioning the microphone on a drum Use the microphone clamp to attach the e 904 to the rim of the drum. Position the microphone on the drum so that it is 3 to 5cm above the drumhead. 3 – 5 cm (1.
Cleaning and maintaining the e 904 Positioning the monitor loudspeakers To prevent feedback and crosstalk, postion your monitor loudspeakers in the angle area of the highest cancellation of the microphone (approx. 180°). 180° Cleaning and maintaining the e 904 CAUTION LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT! Liquids entering the housing of the product can cause a short-circuit and damage the electronics. Keep all liquids away from the product. Do not use any solvents or cleansing agents.
Specifications Specifications Transducer principle dynamic Frequency response 40 - 18,000 Hz Pick-up pattern cardioid Sensitivity (free field, no load) 2.0 mV/Pa Nominal impedance (at 1 kHz) 350 Ω Min.
Overview of applications Connector assignment 1 3 2 + + XLR 1 3 3 3 + 1 2 XLR 2 3 1 XLR + + UNBALANCED + BALANCED 6.3 mm XLR 1 + 2 2 + XLR 6.
