Instruction manual

28
Adjusting settings via the operating menu
Resetting the settings made in the operating menu – “Reset”
When resetting the settings made in the operating menu, only the
selected settings for the pilot tone and for the frequency banks “U1” to
“U6” remain unchanged. For an overview of the factory-preset default
settings, refer to the enclosed frequency information sheet.
Displaying the software revision – “Software Revision”
You can display the current software revision of the diversity receiver.
The “Sync Settings” submenu
“SK Settings”, “SKM Settings” and “SKP Settings”
Via the “SK Settings”, “SKM Settings” and “SKP Settings” menus, you can
set the transmitter parameters directly on the diversity receiver and acti-
vate or deactivate the transfer of these parameters to the transmitter.
Display Function
SK Settings Calls up “SK Settings”
SKM Settings Calls up “SKM Settings”
SKP Settings Calls up “SKP Settings”
Exit Exits the “Sync Settings” submenu and returns to the
extended menu “Advanced Menu”
Setting Transfer is ...
... deactivated
... activated
Advanced Menu
Reset Yes
Reset
“Stored”
SET
SET
Select the desired
setting; apply the
setting
Call up “Reset”
Sync
Sensitivity
– 6dB
Sync
Sensitivity
– 6dB