User Guide

25
Adjusting settings via the operating menu
The extended menu “Advanced Menu”
To get into the extended menu “Advanced Menu”:
왘 From the main menu, select “Advanced”.
Setting the receiving frequencies and the frequency banks “U1”
to “U6” – “Tune”
Via the “Tune” menu item, you can set a receiving frequency to be stored
in the current channel or you can select a different channel in one of the
frequency banks “U1” to “U6” and assign this channel a receiving
frequency.
Setting a receiving frequency for the current channel
When you have selected one of the system banks and then select
the “Tune” menu, the diversity receiver automatically switches to
channel 1 of the frequency bank “U1”. In this case, “U1.1” briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks “U1” to “U6”
are not assigned a receiving frequency.
왘 Press the rocker button until the “Tune” menu item appears.
왘 Press the SET button.
The MHz section of the receiving frequency of the channel is
highlighted.
It is vital to observe the notes on frequency selection on page 30.
왘 Press the rocker button to set the MHz section of the
frequency.
왘 Press the SET button to confirm the MHz section of the
frequency.
The kHz section of the frequency is highlighted.
왘 Press the rocker button to set the kHz section of the frequency.
SET
Tune
B.Ch: U1. 1
Tune
Advanced Menu
Tune
“Stored”
823.925 MHz
823.925 MHz
B.Ch: U1. 1
823.925 MHz
SET SET
SET
Select the frequency
bank and confirm
Select the channel;
store the setting
Call up “Tune”
(special function)
SET