Instruction Manual

15
Adjusting settings via the operating menu
Setting the frequency bank and the channel – “Frequency Preset”
Overview of the frequency banks and channels:
Entering a name – “Name”
Via the “Name” menu item, you can enter a freely selectable name (e.g. the
name of the performer) for the receiver. The name is displayed on the
“Frequency/Name” standard display (see page 10). The name can consist
of up to 8 characters such as:
• letters (without pronounciation marks),
•numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Adjusting the balance – “Balance”
You can adjust the balance in 31 steps. In Focus mode (see next section)
and when one of the standard displays is shown, you can also use the UP/
DOWN button / to adjust the balance. The mode of operation of the
balance setting depends on the selected audio mode (see next section).
When setting up multi-channel systems, please observe the
following:
Only the factory-preset receiving frequencies within one
frequency bank (“1” to “20”) are intermodulation-free. It is vital
to obser
ve the notes on frequency selection on page 21.
Frequency bank Channels Type
“1” to “20” up to 16 per
frequency bank
System bank:
frequencies are factory-preset
“U1” to “U6” up to 16 per
frequency bank
User bank:
frequencies are freely selectable
 Press the UP/DOWN button / to select a character.
 Press the SET button to change to the next segment/character
or to store the complete entry.
Menu
B.Ch: 1. 1
Frequency Preset
B.Ch:
863.100MHz
Frequency Preset
1. 1
B.Ch:
Frequency Preset
Call up “Frequency
Preset”
Select the
frequency bank
and confirm
Select the channel;
store the setting
“Stored”
SET
SET
SET
6. 3
824.500MHz
Call up “Name” Enter a character
and confirm
Enter a character;
store the setting
Menu
Lichael
Name
Name
Name
L ichael
Mi chael
“Stored”
SET
Menu
0
Balance
Call up “Balance” Select the desired
setting
Store the setting
“Stored”
SET
SET
Balance
0
Balance
5