EKEK 500 / 3241 Instructions for use
Contents Safety instructions .................................................................... 3 Delivery includes ....................................................................... 3 The EK 3241 true diversity receiver ...................................... 4 Operating controls .................................................................... 5 LC display panel ......................................................................... 5 Putting the receiver into operation ........................
Thank you for choosing Sennheiser! We have designed this product to give you reliable operation over many years. Over 60 years of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field. Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser products quickly and to the fullest.
Safety instructions y Please read these instructions carefully and completely before using the receiver. y Make these instructions easily accessible to all users at all times. Always include these instructions when passing the receiver on to third parties. y Never open electronic units! If units are opened by customers in breach of this instruction, the warranty becomes null and void. y Water entering the housing of the receiver can cause a short-circuit and damage the electronics.
The EK 3241 true diversity receiver The EK 3241 is a miniature true diversity receiver designed for use with digital ENG camcorders. It can be inserted into the slot-in facility of e.g. Ikegami, Panasonic, Sony or Thomson camcorders without any additional connecting cables being required. The GA 3041-C slot-in housing is used for externally attaching the receiver to camcorders without a slot-in facility.
Operating controls 쐋 SET button Antenna socket, diversity section A ON/OFF button LC display panel button (Down) button (UP) Antenna socket, diversity section B LC display panel 햴 “RF” – appears when an RF signal is being received 8-step RF signal strength display Numeric display 8-step AF (audio) level display 5
Putting the receiver into operation Connecting the antennas The receiver is supplied with two antennas which are necessary for true diversity operation (see “Diversity reception” on page 22). Connect the antennas to the antenna sockets and . Screw the antennas tight. Mounting the receiver into a camcorder The receiver can be inserted into the slot-in facility of most professional camcorders. Suitable mounting kits are available as accessories from your Sennheiser partner.
Secure the mounting frame to the camcorder housing using four screws . Insert the receiver into the slot-in facility until the 25-pin connector securely connects. Screw the receiver (from above) to the mounting frame.
Using the receiver Switching the receiver on/off To switch the receiver on, briefly press the ON/ OFF button . The standard display is shown on the LC display panel . Note: The receiver can only be switched off when the lock mode is deactivated (see “Activating/deactivating the lock mode – Loc” on page 18). neue Abb. von Sennheiser To switch the receiver off, press the ON/OFF button until “OFF” appears on the LC display panel . The LC display panel goes off.
The operating menu The functions of the buttons Button Mode Function ON/OFF Switched off Switches the receiver on SET / Display mode y Briefly pressing the button (with activated lock mode): Calls up the lock mode for deactivation y Pressing the button for 3 sec.
Working with the operating menu By way of example of the “dISP” menu, this section describes how to use the receiver’s operating menu. The operating menu has three modes: y Display mode In display mode, you can display the current menu settings one after the other – even when the lock mode is activated. y Selection mode In selection mode, you can select the menu whose setting you want to change. To change to the selection mode, the lock mode must be deactivated.
Displaying the menu settings in display mode In display mode, and with the lock mode activated, you can display the current menu settings one after the other (see “Overview of the operating menu” on page 14). ON SET Press the button or the button to display the menu settings. If you press the button repeatedly, all menu settings are displayed one after the other. After approx. 15 seconds, the display returns to the standard display.
The following menus are available: Menu Function of the menu PHonE Adjusting the headphone volume* CHAn Selecting a channel tunE Setting receiving frequencies for the channel bank “U” (variable bank) SquELH Adjusting the squelch threshold Auto Activating/deactivating the automatic receiver switch-on/off via the camcorder dISP Selecting the standard display rESEt Loading the factory-preset default settings Loc Activating/deactivating the lock mode ESc Exiting the selection mode and returni
Storing a setting ON SET Press the SET button to permanently store a setting. “StorEd” appears on the display panel, indicating that the setting has been stored. The display then returns to selection mode. Cancelling an entry ON SET Select the “ESc” menu to exit the selection mode and to return to the standard display.
Overview of the operating menu Deactivate the lock mode before adjusting the settings (see “Activating/deactivating the lock mode – Loc” on page 18). Pressing the ON/OFF button will cancel your entry (ESC function) and return you to the display mode. Display mode Setting mode Selection mode SET PHonE SET PH . 15 Current setting Adjusting the headphone volume Current headphone volume PH . 60 / : PH . 0...PH . 64, in steps of 1 SET StorEd 550.385 1 sec. Receiving frequency 1 sec.
Display mode SET Current standard display Setting mode Selection mode dISP Selecting the standard display SET BAt.tr Current setting StorEd rESEt Loading the factory-preset default settings Setting the autolock function / SET rSt. YES / : YES, no “reset” = YES, Receiver loads factory-preset default settings Security check SET “reset” = no, reset is cancelled SET Loc. on Loc. oFF Current setting StorEd : CHAn, FrEq, BAt.tr SET rSt. no StorEd Loc CHAn / : Loc. on Loc.
Adjustment tips for the operating menu Adjusting the headphone volume – PHonE If you operate the receiver with a modified version of the GA 3041-C slot-in housing (see page 23), you can adjust the headphone volume via the “PHonE” menu. The volume can be adjusted between 0 and 64. Caution! High volume! Even short exposure to high volume levels can damage your hearing! Adjust the volume for the connected headphones to a medium level before putting the headphones on.
Selecting the frequencies to be stored in the channel bank “U” (variable bank) – tunE Via the “tunE” menu, you can freely select the frequencies to be stored in the channel bank “U” (variable bank). Via the “CHAn” menu, select the channel whose frequency you want to change. Note: The frequencies stored in the channel bank “F” (fixed bank) cannot be changed.
Selecting the standard display – dISP Via the “dISP” menu, you can select one of the following standard displays: Channel “CHAn” Frequency “FrEq” Battery status “BAt.trY” The selected standard display is shown y after switch-on, y after the parameters have been displayed for 15 seconds in display mode. Note: In order that the transmitter battery status can be displayed on the “BAt.trY” standard display, this functionality must be supported by the transmitter used (see “Suitable transmitters” on page 4).
Care and maintenance CAUTION! Water can damage the electronics of the receiver! Water entering the housing of the receiver can cause a short-circuit and damage the electronics. Only use a slightly damp cloth to clean the receiver. Do not use any solvents or cleansing agents.
If a problem occurs ...
Recommendations and tips ...for optimum reception To avoid overmodulating the receiver, maintain the recommended minimum distance of 5 m between transmitter and receiver. ...for multi-channel operation When operating a multi-channel system, make sure to only use intermodulation-free frequencies. Your local Sennheiser should be able to advise you of legal frequency sets for your country.
Additional information Diversity reception The EK 3241 operates on the “true diversity” principle: A receiving antenna receives not only the electromagnetic waves which reach it by a direct path, but also the reflections of these waves which are created in the room by walls, windows, ceilings and fittings. When these waves are superimposed, destructive interference occurs, which can also be called “field strength gaps”.
Accessories Product name GA 3041-B GA 3041-C GA 3041-15 Product description Battery adapter Slot-in housing Mounting kit with 15-pin sub-D adapter for Sony GA 3041-25 Mounting kit with 25-pin sub-D adapter for Ikegami or Panasonic GA 3041-44 Mounting kit with 44-pin sub-D adapter for Thomson GA 3041-QP Quadpack B 50 Battery box (2 cells) B 250 Battery box (3 cells) BA 50 Accupack (NiMH, 2 cells) BA 250 Accupack (NiMH, 3 cells) DC supply cable DC supply cable (20 cm) with special connectors Cat. No.
Specifications Modulation Frequency range Receiving frequencies wideband FM 450 – 960 MHz 1 channel bank “F” with up to 32 factory-preset frequencies 1 channel bank “U” with up to 20 freely selectable frequencies (tunable in steps of 5 kHz) Switching bandwidth 36 MHz Nominal/peak deviation ±40 kHz / ±56 kHz Frequency stability ±10 ppm (–10 °C to +55 °C) De-emphasis 50 μs Sensitivity typ.
The device complies with the following standards: Radio: EMC: FCC: Canada: ETSI EN 300422-1/-2 ETSI EN 301489-1/-9 Part 15, Subpart B RSS 210, RSS 123 Issue 1 Rev. 2 IC: 2099A-EK3241 Connector assignment (operation with GA 3041-C) XLR-3 connector (female), balanced + 2 4-pin DC socket 1 3 Pin 1: ground Pin 4: 10.
Manufacturer Declarations Warranty regulations The guarantee period for this Sennheiser product is 24 months from the date of purchase. Excluded are accessory items, rechargeable or disposable batteries that are delivered with the product; due to their characteristics these products have a shorter service life that is principally dependent on the individual frequency of use. The guarantee period starts from the date of original purchase.
Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in Germany Publ.
