Users Manual
Establishing a radio link
121
Establishing a radio link
To establish a radio link between the transmitter and receiver, the same
frequency must be set in both devices.
You can do this in a number of different ways:
1. Use the Easy Setup function to perform an automatic frequency set-
up (see “Easy Setup menu item”).
2. Set a frequency in the receiver manually (see “Frequency Preset menu
item”) and synchronize it with the transmitter (see “Synchronizing de-
vices”).
3. Set the frequency on the receiver and the transmitter manually
(EK 500 G4: “Frequency Preset menu item”, SKM 500 G4: “Frequency
Preset menu item”, SK 500 G4: “Frequency Preset menu item”, SKP 500
G4: “Frequency Preset menu item”)
Setting notes
Please note the following when synchronizing a transmitter with a receiv-
ers:
▷ Only use transmitters and receivers from the same frequency range
(see the type plate on the transmitter and receiver).
▷ Make sure that your chosen frequencies are listed in the frequency ta-
ble for the particular frequency range (see “Frequency tables”).
▷ Ensure that the desired frequencies are permitted in your country and
apply for an operating license if necessary.
Please note the information at the following address:
General conditions and restrictions for the use of frequencies